 |
Quadrus Verifier
Quadrus Verifier™NEW
Production-Ready Data Matrix Verifier
Quadrus Verifier™ is an ISO/IEC 15415 and AS9132A-compliant Data Matrix verifier for use in production environments. It is an ISO/IEC 15426-2 certified Data Matrix verifier, ensuring that your marks will be verified accurately every time.
Unlike most verifiers that are mounted on scientific stands designed for the lab, the Quadrus Verifier is a fully-contained, compact device that is easy to integrate into a production setting. Quadrus Verifier’s fully enclosed illumination chamber provides the controlled lighting environment necessary for accurate, repeatable verification. No on-site calibration of optics or lighting is needed to verify marks with Quadrus Verifier. Simply present the part to Quadrus Verifier, trigger, and receive the symbol verification report.
ISO/IEC 15415 Compliant
Quadrus Verifier provides verification of 2D
symbols for all parameters:
| Symbol contrast |
Print growth (not graded) |
| Fixed pattern damage |
Reference decode |
| Modulation |
Axial non-uniformity algorithms |
| Unused error correction |
Grid non-uniformity |
AS9132A
Verifies directly-marked Data Matrix symbols in accordance with the parameters called out in the AS9132A standard:
| Quiet zone |
Dot center offset |
| Dot ovality |
Angle of distortion |
| Cell fill |
Symbol type |
| Contrast |
|
MIL-STD-130L
Requires verification of Data Matrix symbols to both ISO/IEC 15415 and AS9132A standards as required by the MIL-STD-130L specification.
ISO/IEC 15426-2 Certified
Quadrus Verifier is ISO/IEC 15426-2-certified. It is precisely engineered to meet rigorous verification standards, ensuring accurate and consistent verification.
Production-Ready
Quadrus Verifier is the first 2D verifier designed specifically for use in a production environment. Its compact, lightweight design makes the Quadrus Verifier easy to integrate into production processes. A self-contained, factory-calibrated system with flexible mounting allows the Quadrus Verifier to be adapted to any application quickly and easily.
Calibrated System
Quadrus Verifier provides the user with a ready-to-use, ISO/IEC 15426-2 compliant, calibrated system. Simply center a symbol in the field of view and trigger a read cycle, and Quadrus Verifier will output the results. The user is not required to focus the optics or set the light angles. Fixed optics and pre-set illumination angles make Quadrus Verifier consistent, reliable, and accurate.
Illumination Chamber
The chamber is specifically engineered to produce the illumination angles required by the ISO/IEC 15415 standard.
Symbologies:
Quadrus Verifier is specifically engineered to verify 2D Data Matrix codes.
Data Matrix (ECC 0-200)
Microscan Quadrus Verifier Parat#'s FIS-6700-1000 FIS-6700-1001 FIS-6700-1002 FIS-6700-1003 FIS-6700-1004
|
|
|
|
Bar Code Label Printers